Katsaus
The Snap&Fly system is a 3-in-1 modular airplane kit that is based around a single "base module" which holds the motor, propeller, receiver, and actuators. This base module "snaps" on to any one of the three included 3-channel plane modules using magnets, and can easily be removed and snapped on to the other planes. Even the push rods for the control surfaces inside each plane module connect to the base unit using magnets. The planes are powered using a single-cell 85mAh lipo which have magnetic terminals so that the battery just "snaps" into the base module.
Best of all, the kit includes it's own 6-channel 2.4 GHz radio with preset mixing settings for each plane (powered using four AA batteries) which also serves as the charger for the 85mAh lipos. Each battery takes about 40-60 minutes to charge and gets about ten minutes of run time.
These are perfect for flying large indoor spaces or outdoors on calm days.
The each 3-in-1 kit includes one base module, one v-tail plane module, one bi-plane module, one canard plane moduel, three 3.7 volt 85mAh lipos, one replacement motor, one replacement propeller, and one replacement motor mount. The box also seconds as a carrying case with a handle.
3-in-1 Kit Contents:
1x Base Module
1x Canard Plane Module
1x Biplane Module
1x V-Tail Plane Module
1x 2.4 GHz Transmitter (with Built-In Charger)
3x Single-cell 85mAh Lithium Polymer Batteries
1x Spare Propellor
1x Spare 7mm Coreless Motor
1x Spare Motor Mount
